Lesson 12 SDP – Packaging – Solid Dose E-Training

Question 1 of 18

1. Question

Bottle unscramblers are machines that:

Orientate the bottle position so that all bottles are in the upright position
Some but not all bottle unscrambles use deionized compressed air and vacuum to remove dust particles often associated with cardboard shipping contains that the bottle come in
Some unscramblers are designed specifically for glass bottles
All of the above
None of the above

Question 2 of 18

2. Question

Conveyors must always run at the same speeds as other conveyors on a packaging line regardless of the machine speed so that the bottles don’t get fall over.

True
False

Question 3 of 18

3. Question

Desiccants are placed into a bottle…

To protect the product from moisture by continually wicking moisture away from the tablets or capsules, to help assure product stability.
To introduce moisture so that he tablets and capsules get wet and sticky
To keep the tablets and capsules from being bounced around during shipment
To help the cap stay tight on the bottle during shipments

Question 4 of 18

4. Question

Production output is more important than product quality

True
False

Question 5 of 18

5. Question

Some tablet counters / filling machines use electronics to control count accuracy.

True
False

Question 6 of 18

6. Question

Cotton is used to minimize breakage of tablets during shipment and handling

True
False

Question 7 of 18

7. Question

Cotton should always be put in the bottle first and then the tablets and then more cotton on top.

True
False

Question 8 of 18

8. Question

Cappers are machines designed to place and tighten the cap onto the bottle

True
False

Question 9 of 18

9. Question

Induction seals are…

Are one way to seal the bottle for product protects and as a means of security, if the seal is broken, the consumer should do not use the product
Machines that verify the number of tablets and capsules in each bottle
Machines that tighten the cap onto the bottle
High powered magnets that check for metal in tablets and capsules

Question 10 of 18

10. Question

A cap retorquer is a machine that is used to

To tighten the cap because the heat from the induction sealer loosens the cap
To lubricate the bottle
To tighten the cap to make it child proof
To designed to put torque into the tablets which makes people run faster

Question 11 of 18

11. Question

The term “Change parts” means

They are parts that are changed-over on equipment that are specific to a product
This has to do with the gowning procedure
To send the parts back because they are wrong and need to be changed
These are parts that never are changed.

Question 12 of 18

12. Question

Labels can be

The term Pressure sensitive labels means that the label needs to be pealed and pressed into place because there is already an adhesive on the back of the label.
Made of paper in which case a hot glue or cold glue is applied, this is commonly used on glass containers
Labels can be made of a shrink sleeve material that is preprinted and acts as a label and is also tamper evident at the same time.
All the above
None of the above

Question 13 of 18

13. Question

A neck or body band placed onto a bottle is designed to…

Keep the cap from falling off the bottle
Acts as a form of tamper evidence
Keep the label from slipping and getting crooked

Question 14 of 18

14. Question

Tablet and capsules are filled into bottles by counting each individual tablet or capsule using…

Scales and scoops: tablets aren’t counted they are filled into containers by total weight
Slat, Electronic, Disc and Channel type counters / fillers
Operators take turns counting tablets and capsules by hand and then putting them into the machine

Question 15 of 18

15. Question

The key to assuring count accuracy no matter which machine is used is called

Vibration
Singulation
Friability
Saturation

Question 16 of 18

16. Question

Some Cottoners cut the cotton to length and other use rollers to pull the cotton apart in precise lengths

True
False

Question 17 of 18

17. Question

Cotton is always put into the bottle before the tablets or capsules are filled

True
False

Question 18 of 18

18. Question

The two main types of cappers are spindle style and chuck style when using screw on threaded caps

True
False