Lesson 10 – Coating Copy – Solid Dose E-Training

Question 1 of 96

1. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 2 of 96

2. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 3 of 96

3. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 4 of 96

4. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 5 of 96

5. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 6 of 96

6. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 7 of 96

7. Question

Over-wet tablets are most likely to erode

True
False

Question 8 of 96

8. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 9 of 96

9. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 10 of 96

10. Question

Over-wet tablets are most likely to erode

True
False

Question 11 of 96

11. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 12 of 96

12. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 13 of 96

13. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 14 of 96

14. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 15 of 96

15. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 16 of 96

16. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 17 of 96

17. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 18 of 96

18. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 19 of 96

19. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 20 of 96

20. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False

Question 21 of 96

21. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 22 of 96

22. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 23 of 96

23. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False

Question 24 of 96

24. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 25 of 96

25. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 26 of 96

26. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 27 of 96

27. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 28 of 96

28. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 29 of 96

29. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 30 of 96

30. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 31 of 96

31. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 32 of 96

32. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 33 of 96

33. Question

Over-wet tablets are most likely to erode

True
False

Question 34 of 96

34. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 35 of 96

35. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 36 of 96

36. Question

Over-wet tablets are most likely to erode

True
False

Question 37 of 96

37. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 38 of 96

38. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 39 of 96

39. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 40 of 96

40. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 41 of 96

41. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 42 of 96

42. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 43 of 96

43. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False

Question 44 of 96

44. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 45 of 96

45. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 46 of 96

46. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False

Question 47 of 96

47. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 48 of 96

48. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 49 of 96

49. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 50 of 96

50. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 51 of 96

51. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 52 of 96

52. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 53 of 96

53. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 54 of 96

54. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 55 of 96

55. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 56 of 96

56. Question

Over-wet tablets are most likely to erode

True
False

Question 57 of 96

57. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 58 of 96

58. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 59 of 96

59. Question

Over-wet tablets are most likely to erode

True
False

Question 60 of 96

60. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 61 of 96

61. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 62 of 96

62. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 63 of 96

63. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 64 of 96

64. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 65 of 96

65. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 66 of 96

66. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 67 of 96

67. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 68 of 96

68. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 69 of 96

69. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False

Question 70 of 96

70. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 71 of 96

71. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 72 of 96

72. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False

Question 73 of 96

73. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 74 of 96

74. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 75 of 96

75. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 76 of 96

76. Question

A coating process involves the following basics steps

Dedusting, Pre-heat, Spray, and Cool down
Pre-wet, add dust, spray, and repeat 3 times
Spray tablet cold, and heat to dry
Spray tablet as quickly as possible and then turn off pan for drying

Question 77 of 96

77. Question

Machines used to coat tablets are all of the following except

Wurster
Perforated drums (pans)
Solid or conventional pans
High Shear Granulator

Question 78 of 96

78. Question

Unloading of the tablets is a critical step in the process and tablets must be

Hot and wet during unloading
Cooled down and unloaded very carefully to avoid breakage
It is best to wet the tablets just before discharge so they slide better
Inspected one at a time

Question 79 of 96

79. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 80 of 96

80. Question

Over-wet tablets are most likely to erode

True
False

Question 81 of 96

81. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 82 of 96

82. Question

Tablets are coated for all of the following reasons except

It makes them eject off the tablet press faster
Coating improves stability, hardness, and protects the tablet
A coating helps to mask the taste, odor and color
A coating may contain an active ingredients

Question 83 of 96

83. Question

Over-wet tablets are most likely to erode

True
False

Question 84 of 96

84. Question

When coating in a perforated batch style coating system the tablets must be preheated and dedusted and spraying temperatures are optimum between

42-46 degrees C
32-33 degrees C
58-110 degrees C
200-300 degrees C

Question 85 of 96

85. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 86 of 96

86. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 87 of 96

87. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 88 of 96

88. Question

Tablets may get damaged in the coating process for all of the following reasons, except

Soft tablets and may break apart during the coating process
Tablet are sensitive to excessive heat and moisture from the coating process
Poor operator handling during the loading and unloading process
Tablets are much softer after coating and often break

Question 89 of 96

89. Question

Sugar coatings used the 3 D’s to describe the procedures for coating, which stands for:

Dose, Distribute, and Dry
Dampen, Dilute, and Dose
Dark, Damp, and Desperate
Damage, Destroy, and Dispose

Question 90 of 96

90. Question

Atomization of the coating solution involves

Using compressed air to produce a fine mist that dries almost as soon as it reaches the tablet
The use of sub atomic particles that are used to wash the tablets
Atomization refers to the particles within the tablet
This can only be done on 2nd shift

Question 91 of 96

91. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 92 of 96

92. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 93 of 96

93. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False

Question 94 of 96

94. Question

Tablet designs that include logos, bisects (break-line), letters, or numbers must be designed with the type and quantity coating to be applied.

True
False

Question 95 of 96

95. Question

Film Coating usually represents what percentage range of coating on the tablet by weight.

1-3%
5-30%
25-75%
80-200%

Question 96 of 96

96. Question

Gun setup and distance of the gun to the tablet bed surface is critical

True
False